Call No
|
Title
|
IRC:1954
|
Recommended practice for location and layout
of roadside motor-fuel filling stations
|
IRC:4-1955
|
Type design for furlong and boundary stones .
|
IRC:10-1961
|
Recommended practice for borrowpits for road
embankments constructed by manual operation.
|
IRC:1962
|
Recommended practice for location and layout
of roadside motor fuel-filling-cum-service station
|
IRC:11-1962
|
Recommended practice for the design and
layout of cycle tracks. Second Reprint
|
IRC:16-1965
|
Tentative specification for priming of base
course with bituminous primers
|
IRC:17-1965
|
Tentative specification for single coat
bituminous surface dressing. First Reprint
|
IRC:6-1966
|
Standard specifications and code of practice
for road bridges Section II loads and stresses.
|
IRC:20-1966
|
Recommended practice for bituminous
penetration macadam (Full grout)
|
IRC:23-1966
|
Tentative specification for two coat bituminous
surface dressing
|
IRC:12-1967
|
Recommended practice for location and layout
of roadside motor-fuel filling-cum-service stations. First Revision
|
IRC:24-1967
|
Standard specifications and code of practice
for road bridges
|
IRC:25-1967
|
Type design for boundry stones
|
IRC:26-1967
|
Type design for 200-meter stones
|
IRC:27-1967
|
Tentative specification for bituminous
macadam (Base and wonder course)
|
IRC:28-1967
|
Tentative specifications for the
construction of stabilized soil roads with soft aggregate in areas of
moderate and high rainfall
|
IRC:2-1968
|
Route marker signs for national highways
First Revision
|
IRC:30-1968
|
Standard letters and numerals of different
heights for use on highway signs
|
IRC:31-1969
|
Route marker signs for state routes
|
IRC:32-1969
|
Standard for vertical and horizontal
clearances of overhead electric power and telecommunication lines as related
to roads
|
IRC:33-1969
|
Standard procedure for evaluation and condition
surveys of stabilised soil roads First Reprint
|
IRC:14-1970
|
Recommended practice for 2 cm thick bitumen
and tar carpets First Revision
|
IRC:34-1970
|
Recommendations for road construction in
waterlogged areas
|
IRC:35-1970
|
Code of practice for road markings (with
paints)
|
IRC:36-1970
|
Recommended practice for the construction of
earth embankments for road works
|
IRC:38-1970
|
Design tables for horizontal curves for
highways
|
IRC:39-1970
|
Standards
for road-rail level crossings
|
IRC:40-1970
|
Standard specification and code of practice
for road bridges
|
IRC:7-1971
|
Recommended practice for numbering bridges
and culverts. First Revision
|
IRC:9-1972
|
Traffic census on non-urban roads. First
Revision
|
IRC:21-1972
|
Standard specifications and code of practice
for road bridges First Revision
|
IRC:41-1972
|
Type design for check barriers
|
IRC:42-1972
|
Proforma for record of test values of locally
available pavement construction materials
|
IRC:43-1972
|
Recommended practice for tools, equipment
and appliances for concrete pavement construction
|
IRC:44-1972
|
Tentative guidelines for cement concrete mix
design for pavements (For road pavements)
|
IRC:45-1972
|
Recommendations for estimating the
resistance of soil below the maximum scour level in the design of well
foundations of bridges
|
IRC:46-1972
|
A Policy on roadside advertisements. First
Revision
|
IRC:47-1972
|
Tentative specification for built-up spray
grout
|
IRC:48-1972
|
Tentative specification for bituminous
surface dressing using precoated aggregates
|
IRC:49-1973
|
Recommended practice for the pulverization of
black cotton soils for lime stabilisation
|
IRC:50-1973
|
Recommended design criteria for the use of
cement-modified soil in road construction
|
IRC:51-1973
|
Recommended design criteria for the use of
soil-lime mixes in road construction
|
IRC:53-1973
|
Road accident forms A-1 and 4
|
IRC:54-1974
|
Lateral and vertical clearances at
underpasses for vehicular traffic
|
IRC:55-1974
|
Recommended practice for sand- bitumen base
courses
|
IRC:56-1974
|
Recommended practice for treatment of
embankment slopes for erosion control
|
IRC:57-1974
|
Recommended practice for sealing of joints
in concrete pavements
|
IRC:58-1974
|
Guidelines for the design of rigid pavements
for highways
|
IRC:44-1976
|
Tentative guidelines for cement concrete mix
design for pavements ( for non-air entrained and continuously graded
concrete) First Revision
|
IRC:60-1976
|
Tentative guidelines for the use of lime-fly
ash concrete as pavement base or sub-base
|
IRC:61-1976
|
Tentative guidelines for construction of
cement concrete pavements in hot weather
|
IRC:62-1976
|
Guidelines for control of access on highways
|
IRC:63-1976
|
Tentative guidelines for the use of low grade
aggregates and soil aggregate mixtures in road pavement construction
|
IRC:64-1976
|
Tentative guidelines on capacity of roads in
rural areas
|
IRC 65-1976
|
Recommended practice for traffic rotaries
|
IRC:66-1976
|
Recommended practice for sight distance on
rural highways
|
IRC:68-1976
|
Tentative guidelines on cement-fly ash
concrete for rigid pavement construction
|
IRC:14-1977
|
Recommended practice for 2 cm thick bitumen
and tar carpets Second Revision
|
IRC:19-1977
|
Standard specification and code of practice
for water bound macadam Second Revision
|
IRC:67-1977;
|
Code of practice for road signs
|
IRC:69-1977
|
Space standards for roads in urban areas
|
IRC:70-1977
|
Guidelines on regulation and control of
mixed traffic in urban areas
|
IRC:71-1977
|
Recommended practice for preparation of
notations
|
IRC:72-1978
|
Recommended practice for use and upkeep
equipment, tools and appliances for bituminous
pavement construction
|
IRC:1979
|
Environmental considerations in planning and
design of highways in India
|
IRC:74-1979
|
Tentative guidelines for lean-cement
concrete and lean cement-fly ash concrete as a pavement base or sub base
|
IRC:75-1979
|
Guidelines for the design of high
embankments
|
IRC:76-1979
|
Tentative guidelines for structural strength
evaluation of rigid airfield pavements
|
IRC:77-1979
|
Tentative guidelines for repair of concrete
pavements using synthetic resins
|
IRC:78-1979
|
Standard specifications and code of practice
for road bridges. Section : VII Foundations And Substructure Part I : General
Features Of Design
|
IRC:8-1980
|
Type designs for highway kilometer stones.
Second Revision
|
IRC:73-1980
|
Geometric design standards for rural
(non-rural) highways
|
IRC:15-1981
|
Standard specifications and code of practice
for construction of concrete roads Second Revision
|
IRC:52-1981
|
Recommendations about the alignment survey and
geometric design of hill roads. First Revision
|
IRC:79-1981
|
Recommended practice for road delineators
|
IRC:80-1981
|
Type designs for pick-up bus stops on rural
(ie, non-urban) highways
|
IRC:81-1981
|
Tentative guidelines for strengthening of
flexible road pavement using benkelman beam deflection technique
|
IRC:53-1982
|
Road accident forms A-1 and 4
|
IRC:82-1982
|
Code of practice for maintenance of
bituminous surfaces of highways
|
IRC:83-1982
|
Standard specifications and code of practice
for road bridges. Section :IX Bearings Part 1: Metallic bearings
|
IRC:12-1983
|
Recommended practice for location and layout
of roadside motor-fuel filling and motor-fuel filling-cum-service stations. Second
revision
|
IRC:78-1983
|
Standard specifications and code of practice
for road bridges.Section : VII
Foundations And Substructure. First revision
|
IRC:84-1983
|
Code of practice for curing of cement
concrete pavements
|
IRC:85-1983
|
Recommended practice for accelerated
strength testing and evaluation of concrete for road and airfield
constructions
|
IRC:85-1983;3
|
Recommended practice for accelerated
strength testing and evaluation of concrete for road and airfield
constructions
|
IRC:86-1983
|
Geometric design standards for urban roads
in plains
|
IRC:37-1984
|
Guidelines for the design of flexible
pavements. First revision
|
IRC:87-1984
|
Guidelines for the design and erection of
false work for road bridges
|
IRC:88-1984
|
Recommended practice for lime flyash
stabilised soil base/sub-base in pavement construction
|
IRC:5-1985
|
Standard specifications and code of practice
for road bridges. Section I. General features of design ( Sixth revision)
|
IRC:18-1985
|
Design criteria for prestressed concrete
road bridges (Post- tensioned concrete) Second revision
|
IRC:89-1985
|
Guidelines for design and construction of
river training and control works for road bridges
|
IRC:90-1985
|
Guidelines for selection, operation and
maintenance of bituminous hot mix plant
|
IRC:91-1985
|
Tentative guidelines for construction of
cement concrete pavements in cold weather
|
IRC:92-1985
|
Guidelines for the design of interchanges in
urban areas
|
IRC:93-1985
|
Guidelines on design and installation of
road traffic signals
|
IRC:22-1986
|
Standard specifications and code of practice
for road bridges. Section VI Composite construction (First Revision)
|
IRC:39-1986
|
Standards for road-rail level crossings.(
First revision)
|
IRC:94-1986
|
Specification for dense bituminous macadam
|
IRC:21-1987
|
Standard specifications and code of practice
for road bridges. Section III cement concrete (plain and reinforced) .Second
revision
|
IRC:83(Part II)-1987
|
Standard specifications and code of practice
for road bridges. Section : IX Bearings Part II: Elastomeric bearings
|
IRC:95-1987
|
Specification for semi-dense bituminous
concrete
|
IRC:96-1987
|
Tentative specification for two-coat surface
dressing using cationic bitumen emulsion
|
IRC:97-1987
|
Tentative specifications for 20 mm thick
premix carpet using cationic bitumin emulsion
|
IRC : 5-1998
|
Standard specifications and code of Practice for
road bridges Section I General features of Design (Seventh Revision)
|
IRC:29-1988
|
Specification for bituminous concrete
(asphaltic concrete) for road pavement. First revision
|
IRC:38-1988
|
Guidelines for design of horizontal
curves for highways and design tables : First revision
|
IRC:98-1988
|
Guidelines on accommodation of underground
utility services along and across roads in urban areas
|
IRC:99-1988
|
Tentative guidelines on the provision of
speed brakers for control of vehicular speeds on minor roads
|
IRC:100-1988
|
Tentative specification for single coat
surface dressing using cationic bitumen emulsion
|
IRC:101-1988
|
Guidelines for design of continuously
reinforced
concrete pavement with elastic joints |
IRC:102-1988
|
Traffic studies for planning bypasses around
towns
|
IRC:103-1988
|
Guidelines for pedestrian facilities
|
IRC:104-1988
|
Guidelines for environmental impact
assessment of highway projects
|
IRC:105-1988
|
Tentative specification for bituminous
concrete
(Asphaltic concrete) for airfield pavements |
IRC:16-1989
|
Specification for priming of base course
with bituminous primers. First revision
|
IRC:38-1989
|
Guidelines for design of horizontal curves
for highways and design tables
|
IRC:64-1990
|
Guidelines for capacity of roads in rural
areas Rev.1
|
IRC:106-1990
|
Guidelines for capacity of urban roads in plain
areas
|
IRC:51-1992
|
Guidelines for the use of soil-lime mixes in
road construction. First revision
|
IRC:107-1992
|
Tentative specifications for bitumen mastic
wearing courses
|
IRC:1993
|
Compendium of highway statistics
|
IRC:1993;1
|
Compendium of highway statistics
|
IRC:1994
|
Roads in the service of the nation:
Diamond
jubilee year 1994 - An account of Indian Roads Congress |
IRC:108-1996
|
Guidelines for traffic prediction on rural
highways
|
IRC:35-1997
|
Code of practice for road markings. First
revision
|
IRC:41-1997
|
Guidelines for type design for check
barriers. First revision
|
IRC:81-1997
|
Guidelines for strengthening of flexible road
pavements using Benkelman beam deflection technique. First revision
|
IRC:89-1997
|
Guidelines for design and construction of
river training and control works for road bridges. First revision
|
IRC:98-1997
|
Guidelines on accommodation of utility
services on roads in urban areas. First revision
|
IRC:109-1997
|
Guidelines for wet mix macadam
|
IRC:5-1998
|
Standard specifications and code of practice
for road bridges. Section I General
features of design. Seventh revision.
|
IRC:83( Part I )-1999
|
Standard specifications and code of practice
for road bridges. Section: IX Part I : Metallic bearings First revision
|
IRC:6-2000
|
Standard specifications and code of practice
for road bridges.Section : II Loads and stresses .Fourth revision
|
IRC:18-2000
|
Design criteria for prestressed concrete
road bridges (Post-tensioned concrete). Third revision
|
IRC:21-2000
|
Standard specification and code of practice for
road bridges. Section : III cement concrete (plain and reinforced) .Third
revision
|
IRC:78-2000
|
Standard specifications and code of practice
for road bridges.Section : VII Foundations and substructure .Second revision
|
IRC:2001
|
Roads in the service of the nation: Profile
|
IRC:24-2001
|
Standard specifications and code of practice
for road bridges. Section V. Steel road bridges (second revision)
|
IRC:37-2001
|
Guidelines for the design of flexible
pavements Rev.2
|
IRC:52-2001
|
Recommendations about the alignment survey
and geometric design of hill roads Rev.2
|
IRC:67-2001
|
Code of practice for road signs
|
IRC:15-2002
|
Standard specifications and code of practice
for construction of concrete roads. Third revision
|
IRC:40-2002
|
Standard specifications and code of practice
for road bridges. Section-IV (brick, stone and cement concrete block
masonry). Second revision
|
IRC:58-2002
|
Guidelines for the design of plain jointed
rigid pavements for highways.Second revision
|
IRC:83(Part III)-2002
|
Standard specifications and code of practice
for road bridges. Section : IX Bearings. Part III: Pot, pot-cum-ptee, pin and
metallic guide bearings
|
IRC:2003
|
Seminar on integrated development of
rural and arterial road network for socio-economic growth Dec 5-6 2003, New
Delhi, Souvenir
|
IRC:14-2004
|
Recommended practice for open graded premix
carpet. Third revision
|
IRC:19-2005
|
Standard specifications and practice for
water bound macadam. ( Third revision)
|
IRC:110-2005
|
Standard specifications and code of practice
for design and construction of surface dressing
|
IRC:57-2006
|
Recommended practice for sealing of Joints
In Concrete Pavement (First revision)
|
IRC : 15-2008
|
Standard specifications and code of
practice for construction of concrete roads (Third revision)
|
IRC:16-2008
|
Standard specifications And Code of Practice
For prime and tack coat (Second Revision)
|
IRC:22-2008
|
Standard specifications and code of practice
for road bridges Section VI Composite construction (Limit states design)
(Second Revision)
|
IRC:44-2008
|
Guidelines for cement concrete mix design
for pavements (Second revision)
|
IRC:12-2009
|
Guidelines for access, location and layout
of roadside fuel stations and service stations(Third Revision)
|
IRC:27-2009
|
Specifications for bituminous macadam (First
Revision)
|
IRC:111-2009
|
Specifications for dense graded bituminous
mixes
|
IRC:24-2010
|
Standard specifications and code of practice
for road bridges. Section V Steel road bridges ( Limit state method) (Third
revision)
|
IRC:36-2010
|
Recommended practice for construction of
earth embankments and subgrade for road works (First Revision)
|
IRC:90-2010
|
Guidelines for selection, operation and
maintenance of Bituminous hot mix plant (First Revision)
|
IRC:15-2011
|
Standard specifications and code of practice
for construction of concrete roads (Fourth Revision)
|
IRC:34-2011
|
Recommendations for road construction
in areas affected by water logging, flooding and/or salts infestation (First
Revision)
|
IRC:56-2011
|
Recommended practices for treatment
of embankment and road side slopes for erosion control ( First Revision)
|
IRC:58-2011
|
Guidelines for the design of plain
jointed rigid pavements for highways (Third Revision)
|
IRC:87-2011
|
Guidelines for form work, false work
and temporary structures ( First Revision)
|
IRC:98-2011
|
Guidelines on accommodation of
utility services on roads in urban areas (Second Revision)
|
IRC:112-2011
|
Code of practice for concrete road
bridges
|
IRC:37-2012
|
Tentative guidelines for the design of
flexible pavements
|
IRC:53-2012
|
Road accident recording forms A-1 and A-4 (
Second Revision)
|
IRC:67-2012
|
Code of Practice for road signs (
Third Revision)
|
IRC:103-2012
|
Guidelines for pedestrian facilities ( First
Revision)
|
IRC:107-2013
|
Specification for Bitumen Mastic
Wearing
Courses (First Revision) |
IRC:113-2013
|
Guidelines for the design and construction of
geosynthetic reinforced embankments on soft subsoils
|
IRC:114-2013
|
Guidelines for use of silica-fume in rigid
pavement
|
IRC:6-2014
|
Standard Specifications and Code of
Practice for Road Bridges, Section-II Loads and Stresses” (Revised Edition)
|
IRC:78-2014
|
Standard Specifications and Code of
Practice for Road Bridges, Section VII- Foundations and Substructures
(Revised Edition)
|
IRC:83-2014(Part-IV)
|
Standard specifications and code of
practice for road bridges Section-IX Bearings (spherical and cylindrical) Part-IV
|
IRC:115-2014
|
Guidelines for Structural Evaluation
and
Strengthening of Flexible Road Pavements Using Falling Weight Deflectometer (FWD) Technique( With CD) |
IRC:116-2014
|
Specifications for ready made bituminous
pothole ptching mix using cut-back bitumen
|
IRC:5-2015
|
Standard specifications and code of
practice for road bridges Section-I
General Features of Design (Eighth Revision)
|
IRC:11-2015
|
Recommended practice for the design and layout of cycle
Tracks (First Revision)
|
IRC:22-2015
|
Standard specifications and code of
practice for road bridges Section VI composite construction 9Limit state
design)( Third Revision)
|
IRC:35-2015
|
Code of practice for road
markings. (Second Revision)
|
IRC:43-2015
|
Recommended Practice for Plants,Tools
and Equipment Required for Construction and Maintenance of Concrete Roads
|
IRC:58-2015
|
Guidelines for the Design of plain
Jointed Rigid Pavements for Highways(Fourth Revision)
(With CD) |
IRC:75-2015
|
Guidelines for design of High Embankments(First Revision)
|
IRC:82-2015
|
Code of Practice for Maintenance of
Bituminous Road Surfaces (First Revision) (With CD)
|
IRC:83-2015( Part-I)
|
Standard specifications and code of
practice for road bridges Section
IX Bearings Part-I:Roller &Rocker Bearings (Second Revision)
|
IRC:83-2015( Part-II)
|
Standard specifications and code of
practice for road bridges Section
IX Bearings (Elastometric Bearings) Part-II (First Revision)
|
IRC:85-2015
|
Recommended practice for accelerated strength testing
and evaluation of concrete (First Revision)
|
IRC:108-2015
|
Guidelines for traffic forecast on
highways . (First Revision)
|
IRC:109-2015
|
Guidelines for wet mix macadam (First
Revision)
|
IRC:117-2015
|
Guidelines for the structural
evaluation of rigid pavement by falling weight deflectometer .
( With CD) |
IRC:118-2015
|
Guidelines for design and construction of
continuously reinforced concrete pavement (CRCP)
|
IRC:119-2015
|
Guidelines for safety barriers
|
IRC:120-2015
|
Recommended Practice for Recycling of
Bituminous Pavements
|
OBJECTIVE OF THIS BLOG IS TO MAKE NATPAC LIBRARY USERS ABREAST OF THE LATEST DEVELOPMENTS IN THE LIBRARY BY PROVIDING DETAILS ABOUT THE LIBRARY ACTIVITIES, NEW ADDITIONS-BOOKS, JOURNALS, IRC CODES, STUDY REPORTS ETC.
Wednesday 28 November 2018
Total Collection of IRC Codes
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment